®(BAWPS) – Biologic Aquatic Water Purification System – TM

®(C.O.D.) – Naturally occurring “Compressed Oxygen Diffusion” – TM

(BTF) – ®BioTrap Filter – TM

P1215-YPA

     The ®(BAWPS) ®BioTrap RedTop Aquarium Filter – Easy Clean Over Flow Box Dual Drain to Single 1″x1″x1″ Drain Y-Pipe Adapter… – Patent Pending

Features:

The unit is available with the following standard and optional features:

• Standard: (P1215-YPA) Series-II / Series-III Dual drain to Single Drain Y-Pipe Adapter.
• Standard: (1) Year Factory System Warranty

Additional add-on equipment:

• Optional: (P1217-YPP) Series-II / Series-III Y-Pipe Drain Bypass Plug Cap 1.00″.
• Optional: (P1217-YPS) Series-II / Series-III Y-Pipe Drain Bypass Plug Cap Seal 1.00″.
• Optional: (P991-CMP / (P996-CMP) BioPro RedTop Aquatic Pipe Clamp Stainless .75″ or 1.00″.

– Proudly Made in the U.S.A.

®(BAWPS) – Biologic Aquatic Water Purification System – TM

®(C.O.D.) – Naturally occurring “Compressed Oxygen Diffusion” – TM

(BTF) – ®BioTrap Filter – TM

P1215-YPA

     The ®(BAWPS) ®BioTrap RedTop Aquarium Filter – Easy Clean Over Flow Box Dual Drain to Single 1″x1″x1″ Drain Y-Pipe Adapter… – Patent Pending

Specifications:

Overall unit Hieght: 3.00″

Overall unit Width: 2.75″

Overall unit Diameter: 1.00″ x 1.00″ x 1.00″”

Tested on Fish, Coral and Plants… -Nano

**Lets your ®BioTrap RedTop Filter or SeaHorse Over Flow Box Filter manage the water flow inside of any aquarium, pond, refugium, sump or tank application such as an aquarium, tide pool, or shallow pond…

Fits: P800-DSY / P900-SMP / P1000-SMP / P1100-SMP / P1200-OFB/DLX and P1250-OFB/DLX Series Over Flow Box Filters.

®(BAWPS)

®BioTrap – RedTop

SERIES-I

FILTER SYSTEM w/ ®C.O.D.

     Referring to all the embodiments  which are made of a hard ABS plastic material, preferably black in color, with certain parts constructed of the same ABS plastic material, but red in color, this with the exception of outsourced parts such as internal electrical parts, motors, pumps, and batteries.

®(BAWPS) – Biologic Aquatic Water Purification System – TM

®(C.O.D.) – Naturally occurring “Compressed Oxygen Diffusion” – TM

(BTF) – ®BioTrap Filter – TM

P1215-YPA

     The ®(BAWPS) ®BioTrap RedTop Aquarium Filter – Easy Clean Over Flow Box Dual Drain to Single 1″x1″x1″ Drain Y-Pipe Adapter… – Patent Pending

Features:

The (P216-YPA) / (P1217-YPS) BioPro RedTop Aquatic Y-Pipe Single Drain Bypass Cap and Seal 1.00″.

Process Data:

COMPLETE DETAILED DESCRIPTION OF THE:

®(BAWPS)

®BioTrap – RedTop

SERIES-II / Series-III

FILTER SYSTEM

OFB DUAL DRAIN TO SINGLE DRAIN Y-PIPE ADAPTER

     Referring to the manual prime over flow box filter with EPS External Priming System. Before securing the over flow box filter in a suitable location which provides access to the main tank/habitat chamber containment area, pond or aquarium,(usually at the water’s edge), on a stand, bracket, or by straddling the specifically designed unit over the top back wall or the top side wall, using its edge wall mount slide, remove the top cover housing and set it aside.

If the manual prime over flow box filter push-on, supply line-in, port adapter connection tower (If the external sump/filter system is not already sump-pump connected and ready to tie into the manual prime over flow box filter, or optional electric prime overflow box filter conversion controller kit, then slide the supply line-in clamp over, and two inches down, onto the external sump/filter system pump end of the supply line-in pipe tubing). 

Next, slide the supply line-in pipe tubing onto the sump-pump head supply port or extension of the external sump/filter system and secure it in place using a supply line-in clamp by using a screwdriver to twist its supply line-in clamp lock-screw until snug. 

Referring back to the push-on, supply line-in, port adapter connection tower manual over flow box filter bottom housing and electronic over flow filter box bottom housing being similar. 

Slide the supply line-in clamp over and two inches down on the external sump/filter system supply line-in pipe and carefully push/twist-on snugly the supply line-in pipe tubing onto the push-on, supply line-in, port adapter connection slide supply line-in clamp up into the supply line-in clamp access slot until it is  seated against the over flow box filter bottom housing. 

Using the supply line-in clamp access, take a screwdriver and twist the supply 
12  line-in clamp lock-screw until snug. (This completes the installation tie-in for the water supply-in from the  external sump/filter system to  the manual prime over flow box filter version with the optional electric prime overflow box filter conversion controller kit being typical.) 

Referring next to the dual push-n-lock drain line-out connections. (These connections are specifically designed to be press fit only, no pipe clamps are required for these connections.) 

If the external sump/filter system is not already sump drain line-in connected and ready to tie into the over flow box filter, then Slide a standard drain line-in clamp over and two inches down onto the external sump/filter system sump/filter end of the drain line-out pipe tubing. 

Next, slide the drain line-out pipe tubing onto the sump drain line-in port connector of the external sump/filter system and secure it in place using a drain line-in clamp/(s) by using a screwdriver to twist its supply line-in clamp lock-screw until snug.) 

Referring back to the dual push-n-lock drain line-out port connections. 

Carefully push/twist-on snugly, (one or two depending on the external sump/filter configuration), drain line-out pipe tubing into one or both of the dual push-n-lock drain line-out port connections. (If only one dual push-n-lock drain line-out port connection is desired, install the drain line-out push-on drain port connection plug seal, and drain line-out push-on drain port connection plug cap in place atop the unused dual push-n-lock drain line-out port connection.) 

When the Y-pipe dual push-n-lock drain line-out port adapter is used for configuring dual drains to the single drain line-out pipe tubing, simply push the Y-pipe dual push-n-lock drain line-out port adapter into the dual push-n-lock drain line-out port connections until it is fully seated. 

Next, carefully push/twist-on snugly, the drain line-out pipe tubing into the single bottom port connection of the  Y-dual push-n-lock drain line-out port adapter. 

The Y-dual push-n-lock drain line-out port adapter is also specifically designed to be press fit only, no pipe clamps are required for its connections. (This  completes the installation process tie-in for the water drain-out from the manual prime over flow box filter, with the optional electric prime overflow box filter conversion controller kit being typical to the external sump/filter system.) 

When configuring multiple over flow box filter units and having two, four, six or eight drains available, allows for the  creation of a “redundancy” type of multiple over flow box filter system framework, which increases the system’s protection against overfilling of the main tank/habitat chamber containment area should any single drain become clogged or fail for some reason during use. 

When multiple over flow box filter units are used, this simultaneously decreases each of the individual drains capacity limits for the total drainage of the overall main tank/habitat chamber containment area while increasing the reliability and stability of the  overall drainage system. 

Now, with the supply line-in pipe tubing and the drain line-out pipe tubing securely in place, lower the overflow box filter bottom housing into position so that it sits levelly on any rim, tank or edge wall on both the inside and outside of the main tank/habitat chamber containment area. 

Tested true on Fish, Coral and Plants of all kinds… -Nano